"Santa Maria Star" 20m Workboat
“Santa Maria Star”, a 20 metre Timber Commercial Vessel FV4775. This vessel has served well as a heavy-duty tow vessel in recent years.
* 3D Survey (expired in June 2020). Re-instatement subject to fulfilling AMSA requirements.
* Main engine not operational. Requires a full rebuild, see notes below.
|Name||“Santa Maria Star”|
|PDF Attachment||Santa Maria Star Tender Doc|
|Location||Cleanlift Marina (Prince of Wales Bay)|
|Length||65′ 7″ (20.00m)|
|Displacement||50 Tonnes (Lightship)|
|Engine||500 hp Cummins KTA19 (Twin Disc transmission) not operational. Requires a full rebuild. The following items were listed as needing rebuild/replacement: * In chassis rebuild kit including mains * Injectors * Water pump (cast impeller) * Aftercooler seals * Rear main seal * Front crank seal * Alternator drive seal * Oil cooler seals * Service ex-heads Hydraulic steering.|
|Cruise Speed||8 knots|
|Genset||Unitech/Yanmar 4TNV84T-GGE 22.4kVA (7398 hours)|
|Water||Pressurised water (Onga pump)|
|Galley||Large galley equipped with stove/oven, microwave, fridges and twin sink.|
|Hot Water System||Everhot 50 litre hot water cylinder.|
|Ground tackle||Hydraulic anchor winch.|
|Safety gear||As required for 3D Survey. Note: Some items may be past expiry dates.
NAV S-111 Engine-room Fire Suppression System
|Bilge Pumps||As required for survey.|
|Electronics||TMQ Auto helm.
TMQ rudder angle
Koden echo sounder.
GME VHF Radio.
*Radar not included*
|Deck gear||An array of flood and spotlights.|
Disclaimer Boat Sales Tasmania offers the above details as supplied by the vendor in good faith, but cannot guarantee or warrant the accuracy of this information nor the condition of the vessel. All prices are in Australian dollars. Currency converter