Farr ILC 40 "Kirribilli"
$139,000 NOW REDUCED
“Kirribilli” is a comprehensively equipped, well presented competitive race boat. This exhilarating Cookson built flyer is ready to race around the buoys and offshore. Why not the 2020 Sydney to Hobart? “Kirribilli” is up for it, are you?
The experienced owner undertook a solid program of maintenance and upgrades in 2019. This included... *COMPLETE HULL WRAP, *NEW ROD RIGGING. *MAST REPAINT AND REFURB. *ELECTRICAL WORKS. The Andy Dovell designed carbon rig was installed in 2008. This boat represents outstanding value.
|Location||Derwent Sailing Squadron Hobart TAS|
|Designer||Farr Yacht Design|
|Builder||Nick Cookson New Zealand|
|Length||40′ 11″ (12.46m)|
|Hull material||Composite Cored Epoxy/Kevlar. Complete hull wrap March 2019 by Entice Marine.|
|Deck material||Cored Epoxy/Kevlar|
|Engine||Yanmar 3GM30C 30hp with sail drive.|
|Engine hours||1530 as at September 2019.|
|Propulsion||Saildrive with folding Bri-ski 2 blade propeller.|
|Fuel||60 litres approx.|
|Accommodation||Purely for racing...
*Simple galley to port at mast with metho stove and icebox.
*Settee berths with pipe cots over to port and starboard.
|Ground tackle||Anchor with chain and warp.|
|Safety gear||MOB Throwing ring.
Emergency Nav lights.
|Bilge Pumps||Manual bilge pumps|
|Life Jackets||10 x Inflatable life Jackets.|
Batteries: 2 x house, 1 x Engine start. All new March 2019
|Electronics||Nav. Station aft of the engine box.
Garmon GPSMap 172C Chartplotter.
B & G Wind, speed, depth in cockpit.
B&G multi-function at the nav table.
4 x 20/20 mast repeaters
2 x tactical/steering compasses.
AM/FM Radio/CD Player with speakers on and below deck.
|Sail inventory||Mainsail: 2017 Squaretop Carbon. Trysail.
Headsails: 2017 Carbon Heavy, Carbon medium, carbon light, storm jib.
Spinnakers: Masthead symmetrical x 4, Masthead Asymmetrical x 2
Fractional Symmetrical x 1
Fractional Asymmetrical x 1
|Rigging||NEW Rod rigging – March 2019 By Sydney Rigging.
Spars painted (High Tide Marine) and re-furbished March 2019 (Sydney Rigging).
Rig designed by Andy Dovell and installed by Sydney Rigging in 2008.
Fractional ( 2 spreaders swept-back) Carbon mast.
Carbon boom and spinnaker pole.
|Deck gear||Harken Winches...
2 x #53.2 2-speed self-tailing (backstay)
2 x #48.2 2 speed self tailing (mainsheet)
2 x #48.3 3-speed (primaries)
2 x #45 2-speed self-tailing (Halyard)
Tiller – composite with Spinlock extension.
Fenders and Mooring lines
|Remarks||The IRC Certificate shows a TCC of 1.169. Receipts are available for work done in 2019.|
Disclaimer Boat Sales Tasmania offers the above details as supplied by the vendor in good faith, but cannot guarantee or warrant the accuracy of this information nor the condition of the vessel. All prices are in Australian dollars. Currency converter